Using the LOCATE Button
Viewing Staff Locations
ProCare 6000 Operation Manual
The LOCATE button is used to view stations where staff have registered their presence
(does not work with IR location). You can view staff locations by staff level only.
1. Press LOCATE. These selections are available:
DEFAULT
Loc Scan: RED = 1
Loc Scan: AMBER = 2
Loc Scan: GREEN = 3
Review = VOL DOWN
Press the up or down arrow on the VOL key to scroll to the desired choice.
2. Press 1, 2, or 3 to locate the selected staff level.
a. "Waiting for Data" appears briefly.
b. If a staff member of the selected level is registered, the display shows the station
(1040) and the staff level (GREEN). The number of staff who have registered at
the selected level flashes at the far right of the display (1 of 3). See Figure 2-16.
Use the VOL key to scroll through the staff locations.
c. If no staff of the selected level are registered, the display shows "No Rooms
RED" ("AMBER" or "GREEN").
1040 GREEN
Figure 2-16: Staff Location Display
3. Press #CNCL once to return to step 1 and select another staff level.
—OR—
Press *ANS to connect to the displayed station, speak to the staff member, then press
#CNCL or replace the handset to end the call.
—OR—
Press #CNCL twice to exit the locate function.
Using the LOCATE Button
YOUR SYSTEM
Loc Scan: ____________________ =1
Loc Scan: ____________________ =2
Loc Scan: ____________________ =3
Review = VOL DOWN
1
of 3
2-15