Auto-Dialing (MENU, 1)
Auto-Dialing (MENU, 1)
3-2
This menu selection allows you to auto-dial a station. Up to eight auto-dial numbers can
be assigned during system configuration. (See the chart below.)
1. Press MENU.
2. Press 1 to select Auto-Dial = 1. The first programmed auto-dial number appears in
the display followed by "autoDial." See Figure 3-1.
1161
Figure 3-1: Auto-Dial Display Showing Station 1161 Dialed Automatically
3. Press the VOL up and down key to scroll additional auto-dial numbers.
4. Press *ANS to connect to a displayed number.
a. "Waiting for Resp" (response) appears briefly.
b. If the connection is successful, the station and "TALK" appear in the display.
c. If the connection is not successful, the error tone sounds and the base master
reverts to the display state.
5. Press #CNCL to end the call.
Pre-Programmed Auto-Dial Numbers
Auto-Dial #1
Auto-Dial #2
Auto-Dial #3
Auto-Dial #4
Auto-Dial #5
Auto-Dial #6
Auto-Dial #7
Auto-Dial #8
Chart 3-1: Preprogrammed Auto-Dial Numbers
autoDial
ProCare 6000 Operation Manual