Section 3-Menu Operations; Introduction; Using The Base Master Menu; Accessing Menu Selections - Dukane 4A3610B Operation Manual

Introduction

Using the Base Master Menu

Accessing Menu Selections

If an Error Tone Sounds When Accessing Menu Selections

ProCare 6000 Operation Manual
This section explains how to use the base master's menu items to perform various
functions. Please keep the following in mind:
Some of these menu selections may not be available depending on the configuration of
•
your system.
Some of these menu selections were already discussed in Section 2. However, Section
•
2 explained how to use these selections while connected to a call. This section explains
how to use these selections when your base master is NOT connected to a call.
These instructions refer to the system's default settings. If your system has been con-
•
figured differently, note these differences in the areas provided or in the margins.
To access the menu selections:
1. Press MENU.
2. Use the VOL key to scroll to the desired menu selection, then press *ANS.
Notes:
In this manual, each title is followed by the key sequence for that menu function.
Buttons and keys should be pressed in the order written. Example: For (MENU, 1)
press the MENU button, then the 1 key.
The base master sounds a busy tone (six short, low pitch beeps) if it has an associated
video display and you press the MENU button when the video display is in the program-
ming/assignment mode. The video display must be in a pending display state for you to
perform MENU functions from the base master, and vice-versa.
Section
Menu Operations
3
3-1