ProCare 6000 Operation Manual
nDA#> _ _ _ _ _ _ _ _ _
Figure 3-19: Assigning Swing Stations to a Duty Area
6. Enter the new duty area and press *ANS.
a. "Waiting for Data" appears briefly. If the duty area name is valid, an acceptance
tone sounds (two high pitch beeps) and the base master returns to Figure 3-19.
b. If the duty area name is invalid, an error tone sounds (two low pitch beeps) and
the base master returns to Figure 3-19. Re-enter the duty area name or press
#CNCL to exit.
7. Repeat steps 5 and 6 to assign other swing stations to duty areas.
8. Press #CNCL repeatedly to exit the menu and return to the normal display. If you do
not, the base master automatically exits the menu after a programmed interval.
Swing Station # 1
Swing Station # 2
Swing Station # 3
Swing Station # 4
Swing Station # 5
Swing Station # 6
Swing Station # 7
Swing Station # 8
Swing Station # 9
Swing Station # 10
Swing Station # 11
Swing Station # 12
Swing Station # 13
Swing Station # 14
Swing Station # 15
Swing Station # 16
Swing Station # 17
Swing Station # 18
Swing Station # 19
Swing Station # 20
Chart 3-2: Designated Swing Stations
Assigning Base Masters, Staff, and Stations (MENU, 3)
Designated Swing Stations Chart
3-15