Sending a Pocket Page While Connected to a Call
Sending a Pocket Page While Connected to a Call
2-8
nAsID#>
Figure 2-10: New Alternate Staff Assignment
5. Enter the new staff assignment. If the ID number is shorter than the number of digits
shown on the display, press *ANS.
a. "Waiting for Resp" (response) appears briefly.
b. The call reappears in the display followed by TALK.
6. Press #CNCL or replace the handset to end the call.
Follow these steps to send a pocket page to a staff member while connected to a call.
Notes:
This is an optional feature. Your system may not be equipped for pocket paging.
•
If your system has version 4.XX video displays, use the video display to perform
•
this function instead of the base master.
If your system has version 5.XX video displays, no pocket paging functions can be
•
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MessageMaker ip™ software to page staff.
See the MessageMaker ip User Guide.
You should be familiar with pocket paging before performing these functions.
•
See Performing Pocket Page Functions beginning on page 3-20.
_ _ _ _
ProCare 6000 Operation Manual