Placing a Call Using Speed Dial
Placing a Call Using Auto-Dialing
ProCare 6000 Operation Manual
Speed dial is only available if any of your base master's alpha keys have been configured
as speed dial keys. These keys can be configured to dial a station number, a staff ID, a
station prefix, or other functions. See Configurable Buttons and the chart on page 3-30.
If a key is configured to dial a station, you can place a call this way:
1. Press the configured button to speed dial the assigned station. The connect display
appears with the number dialed. See Figure 2-6 on page 2-4.
2. Either press the TALK button to communicate with the station (and release it
to listen), or lift the handset to communicate privately with the station.
3. Press #CNCL or replace the handset to end the call.
The auto-dial feature is a menu selection that allows you to connect directly to a prepro-
grammed station. This is similar to a speed dialing feature on a conventional phone
system. See Auto-Dialing on page 3-2 for full instructions.
Placing a Call
2-5