Dual 37-Pin Receptacle Operation; Figure 4-11: Dual 37-Pin Wall Receptacle (Model 9A2137A) - Dukane 4A3610B Operation Manual

Dual 37-Pin Receptacle Operation

ProCare 6000 Operation Manual
To cancel the call, press the station's CANCEL button. When you do, this happens:
The station's call assurance LED extinguishes.
•
The associated corridor light extinguishes.
•
The tone ceases at the duty stations.
•
The call disappears from the base master and video display (if present).
•
Note:
Disconnecting the cord also places a call. Reinsert the call cord (or insert a dummy plug)
and press the station's CANCEL button.
The dual 37-pin wall receptacle
is used when a patient is required
to use a pillow speaker for medi-
cal or personal reasons while
®
recovering in a Hill-Rom
®
Stryker electronic bed with
side-rail communications and
room controls. The dual recepta-
cle allows the bed and the pillow
speaker to be plugged in at the
same time, allowing control from
either device. The bed and pil-
low speaker can be plugged into
either receptacle. The 9A2137A
can be used with the 7A2031
standard pillow speaker or the
7x2131 smart pillow speakers.
When a device is unplugged
from either receptacle, a cord out
call is placed. Either reinsert the device or insert one of the attached dummy plugs, then
press the CANCEL button on the associated patient station.
Note:
You must have at least one device (bed or pillow speaker) plugged into the 9A2137A
for the patient to be able to communicate with the master station attendant through
the associated patient station. If both receptacles are occupied by the dummy plugs,
the associated patient station will not have audio capability.
For instructions on placing calls from pillow speakers, see Pillow Speaker Operations on
page 4-22. For instructions on placing calls from electronic beds, see the documentation
supplied with the beds.
Dual 37-Pin Receptacle Operation
or
Figure 4-11: Dual 37-Pin Wall Receptacle
(Model 9A2137A)
4-17