Using The Remind Button; Placing A Call On Reminder; Figure 2-17: Idle Display Showing An Amber Reminder (Ra) - Dukane 4A3610B Operation Manual

Using the REMIND Button

Using the REMIND Button

Placing a Call on Reminder

2-16
When a call is placed on reminder, it reappears at the base master after a preprogrammed
interval if a staff member does not attend to the patient and cancel the call. It will con-
tinue to reappear at the base master until it is canceled at the station that placed the call.
Follow these steps to place a station on reminder.
Note:
These instructions explain how to manually set a reminder. Your system may also be
configured to set reminders automatically. For example, a system can be configured
to automatically set a red reminder as soon as you answer a patient priority call.
1. Connect to the station either by answering their call or by calling them. (See pages
2-2 and 2-3, and pages 2-4 and 2-5.)
2. Press REMIND. These selections are available:
DEFAULT
Rem Set: RED = 1
Rem Set: AMBER = 2
Rem Set: GREEN = 3
Review = VOL DOWN
Press the up or down arrow on the VOL key to scroll through the selections.
3. Press 1, 2, or 3 to select the desired reminder level.
a. "Waiting for Resp" (response) appears briefly.
b. The station number and "TALK" appear in the display.
4. Press #CNCL to end the call.
When the base master returns to the idle display, it will show the system (ProCare
6000), the set reminder (R), and the reminder level (A for amber). See Figure 2-17.
Note:
The reminder designations show the first letter of the assigned reminder level
(default: RED = R, GREEN = G, AMBER = A). If your system is configured with
different reminder level names (e.g., Nurse, LPN, Aide), the display will show the
first letter of the assigned designation (e.g., N, L, A).
ProCare 6000

Figure 2-17: Idle Display Showing an Amber Reminder (RA)

YOUR SYSTEM
Rem Set: ____________________ =1
Rem Set: ____________________ =2
Rem Set: ____________________ =3
Review = VOL DOWN
ProCare 6000 Operation Manual
RA