Canceling A Normal Call; Placing A Priority Call - Dukane 4A3610B Operation Manual

Canceling a Normal Call

Placing a Priority Call

Appendix: Four-Gang Station Operations
Press the station's CANCEL button to cancel a normal call from a patient or staff/duty
station. (This will also cancel any calls of other priorities placed from this station.)
See Figure A-3 on page A-4. When you do, this happens:
The station's CALL LED extinguishes.
•
The associated corridor light extinguishes.
•
The tone ceases at the base master.
•
The call disappears from the base master and the video display (if present).
•
The call disappears from stations where the system monitor function is active or from
•
staff/duty stations where staff presence is registered.
Notes:
Normal calls are also canceled when answered by the base master, or when a staff mem-
ber registers presence in the same room as the patient station. However, a priority call or
a call placed from an emergency station associated with the patient station can only be
canceled by pressing the emergency station's CANCEL button.
Press the station's CALL, CODE BLUE, or STAFF EMERG button to place a pro-
grammed priority, code blue, or staff emergency call from a patient or staff/duty station.
See Figure A-3 on page A-4. When you do, this happens:
The station's CALL LED illuminates to confirm call placement.
•
The associated corridor light illuminates and flashes at a designated rate.
•
The call appears at the base master and at the video display (if present).
•
A tone sounds at the station and at the base master.
•
A tone sounds at any station where the system monitor function is active (default) or
•
any staff/duty station where presence is registered.
If presence is registered, the corresponding staff level and SYSTEM MONITOR LEDs
•
flash.
Note:
Pressing CALL will only place a priority call when the station has been assigned a prior-
ity designation. See Assigning Station Call Priorities on page 2-19.
Basic Station Operations
A-5