Paging Alternate Staff (MENU, 5, 2)
ProCare 6000 Operation Manual
6. Either press *ANS to page the staff person without sending a message, or enter a
two-digit pager message number. (See Pocket Pager Messages on page 2-13.)
a. "Waiting for Resp" (response) appears briefly.
b. The page is sent and the base master returns to the display state.
7. Repeat steps 1 through 6 to page other primary staff members.
You can send a page to the alternate staff member assigned to a station. The page will in-
clude the station number and an optional two-letter coded message relating to the patient.
Notes:
If your system has version 4.XX video displays, use the video display to perform
•
this function instead of the base master.
If your system has version 5.XX video displays, no pocket paging functions can be
•
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MessageMaker ip software to page staff.
See the MessageMaker ip User Guide.
1. Press MENU.
2. Press 5 to select Pocket Page = 5.
3. Press 2 to select Page Bed Alt = 2. Figure 3-20 on page 3-20 appears.
4. Enter the station number. If the number is shorter than the number of spaces in the
display, press *ANS.
5. Figure 3-21 on page 3-20 appears, showing the station you are connected to.
6. Either press *ANS to page the staff person without sending a message, or enter a
two-digit pager message number. (See Pocket Pager Messages on page 2-13.)
a. "Waiting for Resp" (response) appears briefly.
b. The page is sent and the base master returns to the display state.
7. Repeat steps 1 through 6 to page other alternate staff members.
Performing Pocket Page Functions (MENU, 5)
3-21