Placing a Call on Reminder
Placing a Call on Reminder
5-6
1. Connect to a station by placing or answering a call. (See page 5-3 or 5-4.)
2. Press 1 (red), 2 (amber), or 3 (green) on the key pad to set the desired reminder level.
The reminder is set.
•
The associated corridor light and the patient station's CANCEL LED and pillow
•
speaker's LED (if present) flash.
3. To end your telephone session, press the pound (#) key twice to disconnect from the
Telco. A brief warble tone confirms disconnection.
—CAUTION—
You must press the pound (#) key TWICE to disconnect from the Telco. If you do
not, the Telco will be unusable until it times out.
Note:
If your facility has the newer Telco card (Model 110-3628B) and a PBX that supports the
Call Party Disconnect feature, you do not need to press the pound (#) key twice. You can
simply hang up the phone.
ProCare 6000 Operation Manual