Base Master Errors; Accessing Testing And Programming Functions (Menu, 8); Program (Menu, 8, 1); Version/Id (Menu, 8, 2) - Dukane 4A3610B Operation Manual

Base Master Errors

Accessing Testing and Programming Functions (MENU, 8)

Program (MENU, 8, 1)

Version/ID (MENU, 8, 2)

ProCare 6000 Operation Manual
If your base master indicates errors (a flashing "E" in the right corner, and a continuous
error tone of two rapid, low pitch tones), press the TONE button to silence the tone, and
contact the proper authority. If you are the person authorized to deal with base master
errors, see Reviewing Master Station Error Listings in the ProCare 6000 System Installa-
tion and Configuration Manual for instructions.
A password is required to access the programming functions. See the ProCare 6000 Sys-
tem Installation and Configuration Manual.
This function displays the base master's current version, ID number, and operation
information. This information may be needed during troubleshooting or configuration.
1. Press MENU.
2. Press 8 to select Test/Program = 8.
3. Press 2 to select Version/ID = 2. This information appears in the display window:
Version # and date of the base master's software
The base master's architectural number
The Master Interface Unit (MIU) ID#
The base master's MIU address
4. Press the up or down arrow on the VOL key to scroll this information.
5. Press #CNCL repeatedly to exit the menu and return to the normal display. If you do
not, the base master automatically exits the menu after a programmed interval.
Base Master Errors
3-29