Base Master Layout; Display Window; Handset; Key Pad - Dukane 4A3610B Operation Manual

Base Master Layout

Display Window

Handset

Key Pad

Answer (*ANS) Key

ProCare 6000 Operation Manual
The base master has a 16-character alphanumeric LCD window that shows system states,
active conditions, and call status. It also shows programming functions, operating func-
tions, and menu selections.
The base master has a number of "states" that indicate the base master's current function,
such as the idle state (when no calls are present), the connect state (when the base master
is connected to a call), and the editing state (when the base master is being used to per-
form system configuration). These states are shown in the display window.
The base master has a telephone-type handset with a hookswitch that allows private
conversations with stations in the system.
The base master key pad looks like a standard telephone key pad with the addition of a
TALK button and a FLASH button (described on page 1-6). The key pad is used to place
calls and to perform programming functions. The *ANS key and #CNCL key are used for
the functions described below.
This key is pressed to answer calls that appear in the display window. It is also used as an
enter key when performing various programming functions. After completing a function,
you may be instructed to press the *ANS key to enter your selection and advance to the
next selection or command.
Base Master Layout
1-5