Table of Contents
Advertisement
Removing/mounting the front panel
10.1
Removing/mounting the front panel
Ê Open the server, and remove the front doors as described in section
"Removing/mounting the front doors" on page 47.
Figure 46: Removing the front panel
Ê Remove the 14 fastening screws (1) which attach the front panel to the
assembly frame of the system unit with a TX20 screwdriver.
Ê Lift the front panel from the front of the system unit in the direction
indicated by the arrows (2).
Mounting is done in the reverse order.
98
Appendix
U41147-J-Z156-2-76
Advertisement
Table of Contents
