Hardware
1.4.7
Hardware Settings
Hardware Settings is displayed by selecting "Settings" and clicking "Hardware Settings" of
the menu on the left side of the screen.
Various settings for the system can be set in Hardware Settings.
(1)
(3)
(1)
Clicking "Submit" enables to set the information of (3).
(2)
Clicking "Default Select" enables to restore configuration status to default status.
(3)
Configuration
Set the configuration information.
Switch DVD and Front USB : Switch the server connecting DVD and front USB
(2)
IMPORTANT:
•Hardware Settings is available for A1080a-S/A1080a-D model.
But don't execute this menu for A1080a-S model. It is invalid
operation because Server 2 doesn't exist. If the connection
destination is changed to Server 2, execute this menu again and
connect to Server 1.
•Execute online switching while the DC power is off because the
drive may not be recognized depending on timing. When
switching after OS is operating, the drives are recognized as USB
devices. So please follow the USB operation on OS when
removing/unmounting or inserting/mounting the devices.
390