Table of Contents
Advertisement
Define a color bar
Color bars are color control strips to verify the color quality of the prints. The color bar uses the
print settings of the media definition.
The bar is printed in the trim area of a page. Duplex sheets get the bar at both sides and simplex
sheets at the print side.
There are four factory defined color bars:
• FOGRA CMYK Media Wedge 2008 Version V2.2a Proof
• FOGRA CMYK Media Wedge 2008 Version V3.0a Proof
• FOGRA CMYK Media Wedge 2008 Version V3.0b Proof
• IDEAlliance Control Strip 2009
NOTE
You cannot create your own color bars.
Go to the color bars
1. Open the Settings Editor and go to: [Color]→[Color & information bars].
[377] [Color & information bars] tab
Edit a color bar
1. Select a color bar.
2. Click [Edit].
[378] [Color bars] menu
3. Change the name and description.
4. Click [OK].
Delete a color bar
You can only delete previously imported color bars.
1. Select one or more color bars.
2. Click [Delete].
[379] [Color bars] menu
Import a color bar
1. Click [Import].
Chapter 11 - Manage color definitions
Define a color bar
289
Advertisement
Table of Contents
