Tray 5 (Bypass) Screen; When Custom Size Is Selected - Xerox 4112 User Manual

Tray 5 (Bypass) Screen

If you want to make copies on special paper that cannot be loaded in trays 1 through 4 or trays
6 through 7, use Tray 5 (Bypass).
1. Load the custom sized paper in the Tray 5 (Bypass) tray.
2. Select the Change Settings paper tray.
3. Use the up and down buttons to navigate the displayed Paper Size options list.
4. From the Paper Size list, select the applicable Paper Size.
5. Use the up and down buttons to navigate the displayed Paper Type options list.
6. From the Paper Type list, select the applicable Paper Type.
7. Select Save to save the changes.

When Custom Size is Selected

You can set the width (X) within the range from 5.9 to 19.2 inches (140 to 400 mm) and the
height (Y) within the range from 4.0 to 12.9 inches (100 to 330 mm) in 0.1 inches or 1 mm
increments.
1. From the Tray 5 Bypass screen, Paper Size list, select Custom Size.
2. Set the Paper Size dimensions using the up/down, left/right buttons.
3. Select the Paper Type from the displayed list.
4. Select the up button to display the previous screen and select the down button to display
the next screen.
5. Select Save to save the changes.
Tips
• Printing may not be performed correctly when the X (horizontal) direction of a non-
standard size paper is less than 5.7 inches (148 mm).
• When copying both sides on a non-standard size paper, specify the size from 7.2 to 19.2
inches (182 to 488 mm) for the X (horizontal) direction and from 5.5 to 13.0 inches (140 to
330 mm) for the Y (vertical) direction.
Xerox 4112/4127 Copier/Printer
User Guide
Copy
2-15