Xerox 4112 User Manual page 328

Problem Solving
Category
Error Code
C P S
024-984 m m
024-985 m m
024-987 m m
024-988 m m
024-989 m m
027-452
027-500 m
027-501 m
027-502 m
027-720
027-721
027-722
027-724
027-725
12-34
Xerox 4112/4127 Copier/Printer
User Guide
O
M
Cause: There is a problem with the booklet maker stapler.
Remedy: Check the staple cartridge and reset correctly.
Cause: There is a problem with the booklet maker stapler.
Remedy: Check the staple cartridge and reset correctly.
Cause: The envelope folder tray is full.
Remedy: Remove all paper from the tray. Set the output tray for
three fold.
Cause: The envelope folder tray is not detected.
Remedy: Check that the folder tray is correctly attached and set.
Cause:: There is a problem with the booklet maker stapler.
Remedy: Check the staple cartridge and reset correctly.
m Cause: IP address already exists.
Remedy: Change the IP address.
For information about network settings, refer to the System
Administration Guide.
m Cause: Unable to resolve SMTP server name during answer
E-mail send.
Remedy: Check that the SMTP server settings from CWIS are
correct.
m Cause: Unable to resolve POP3 server name when using POP3
protocol.
Remedy: Check that the POP3 server settings from CWIS are
correct.
m Cause: Unable to login to POP3 server when using POP3 protocol.
Remedy: Check that the user name and password used in the POP3
server from CWIS are correct.
m Cause: Unable to find the server of an application interface
destination.
Remedy: Check DNS server application or check whether an
application interface installed on the computer is registered by DNS
server or not.
m Cause: An application interface destination does not exist.
Remedy: Check whether an interfaced application operates
correctly.
m Cause: The job was timed out during connection with an
application interface destination. An application linkage destination
does not exist.
Remedy: Try to process the job flow.
m Cause: An application interface destination could not be accessed.
Remedy: Check whether an interfaced application operates
correctly. When it is operating, check the log. When it is not
operating, check the network environments.
m Cause: A job operation failed using an application interface.
Remedy: Check whether an application linked operates correctly.
When it is operating, check the log. When it is not operating, check
the network environments.
Cause and Remedy