Xerox 4112 User Manual page 418

Addendum
Fault code Possible cause
049 222 Sensor problem/failure
049 223
049 224
049 225
049 228
049 229
049 232
049 233
049 234
049 235
049 236
049 237
049 238
049 239
049 240
049 241
049 242
049 243
049 244
049 245
049 246
049 247
049 248
049 249
049 250
049 251
049 252
049 253
049 280 Sensor problem/failure
049 281
049 282
049 283
049 284
049 285 EEPROM error
049 286
049 287 System error
049 288 A board in the machine or
HCS may be
disconnected.
049 300 Upper cover is open
049 310 HCS download mode
failure
049 700 Error in stacking the
output paper/media
049 940 Front door is open
049 941 UI indicates the Stacker
Cart and/or Tray needs to
be reset
14-28
Xerox 4112/4127 Copier/Printer
User Guide
Recommended solution
Power off, then power on
Power off, then power on
Power off, then power on
Power off, then power on
Power off, then power on
Close the upper cover
Power off, then power on
Remove the paper from the stacker tray
Close the front door
Press the Unload button. The Wait light blinks until the
Stacker Tray has reached the down position.
When the Stacker Tray has reached the down position,
open the front door.
Position the Stacker Cart securely into the HCS.
Close the front door.