Build Job - Xerox 4112 User Manual

Build Job

This feature allows you to change and save settings individually for each document page or
stack. You can then make copies of documents with different settings as one job.
1. On the All Services screen, select Copy.
2. Select the Job Assembly tab.
3. Select Build Job.
4. Select Build Job On.
5. Select, set and save the applicable features from the features shown at the bottom of the
Build Job screen.
• Copy Output... (See Copy Output)
• Booklet Creation... (See Booklet Creation)
• Covers... (See Covers)
• Annotations (See Annotations)
• Segment Separators (See Segment Separators)
• Watermark... (See Watermark)
• Output Orientation... (See Output Orientation)
6. Select Save to keep your choices.
7. Press the Start button to start the job.
Tip
You can display the previous features screen by selecting the up button, and you can display the
next screen by selecting the down button.
Xerox 4112/4127 Copier/Printer
User Guide
Copy
2-55