Xerox 4112 User Manual page 300

Problem Solving
Symptoms
Documents are Are the documents too small?
not fed into the
document feeder.
An error message Check the position of the
is displayed after paper guides at the front side
paper is loaded in of paper Tray 5 (Bypass).
paper Tray 5
(Bypass) and the
Start button is
pressed.
Documents jam Is the right type of paper/
often. media being used?
Are you trying to copy irregular
shaped documents, business
cards, transparencies, or thin
documents?
Are you trying to copy
documents affixed with sticky
labels, paper clips or adhesive
tape?
Are the document guides at
the correct position?
Is part of the document
ripped, and a piece of paper
remaining in the document
feeder?
When importing originals of
different sizes, is the
Mixed Size Originals setting
set to ON?
Is an A5-size document loaded
horizontally (
document feeder when the
Mixed Size Originals feature is
in use?
A corner of the Is the document curled?
document is
folded.
Stapler faults –
12-6
Xerox 4112/4127 Copier/Printer
User Guide
Check
The minimum size of the document that can be
loaded on the document feeder is A5 and 5.5 X
8.5.in.
Refer to Loading Paper into Trays on page 8-1.
Set the paper guides to the correct positions.
Refer to Loading Paper into Tray 5 (Bypass) on
page 8-5.
Make sure the document feeder is loaded properly
with acceptable media.
Refer to Loading Documents on page 2-1.
Remove sticky labels, paper clips or adhesive tape
from the document before copying.
Properly set the document guides.
Refer to Loading Documents on page 2-1.
Open the document feeder cover and check for
pieces of paper.
Refer to Document jams on page 12-73.
Set Mixed Size Originals to ON.
Refer to Mixed Size Originals on page 2-27.
Load the A5-size document vertically ( ).
) on the
Flatten out the curl and load the document again.
Refer to Stapler Faults on page 12-76.
Remedy