Printable Area; Standard Printing Area; Extended Printing Area - Xerox 4112 User Manual

Specifications

Printable Area

Standard Printing Area

The standard area that can be printed leaves a margin of 0.16 inches (0.161 in./4.1 mm) on all
four edges of the paper (for SRA3, 12.6 in./320 mm wide, a margin of 0.45 in./11.5 mm left and
right).
Note
The actual printing area may vary depending on the printer (plotter) control language.

Extended Printing Area

If you choose to extend the printing area in a print, the maximum area for the print is 12.01 ×
18.90 inches (305 × 480mm). The maximum area for a copy is 43.2 × 17.01 inches (297 ×
432mm). The printing area changes depending on paper size used.
Note
To extend the print area, change the PCL print driver or the Print Area setting on the touch
screen.
Note
For information on how to adjust print driver settings, refer to the online help for the print driver.
Note
For more about Control Panel settings, refer to Print Area in the System Administration Guide or
contact your System Administrator.
When the paper width is less
than 12 inches
UnPrintable
Printable
UnPrintable
Printable
13-12
Xerox 4112/4127 Copier/Printer
User Guide
When the paper width is 12
inches
UnPrintable
Printable
UnPrintable
Printable
When the paper width is
12.6 inches
(SRA3 (320 mm width))
UnPrintable
Printable
UnPrintable
Printable