Xerox 4112 User Manual page 322

Problem Solving
Category
Error Code
C P S
016-702 m
016-703 m
016-704
016-705 m
016-706 m
016-707 m
016-708 m
m
016-709
016-710 m
12-28
Xerox 4112/4127 Copier/Printer
User Guide
O
M
Cause: PCL print data could not be processed due to insufficient
print page buffer.
Remedy: Take one of the following actions:
Set Print Mode to Speed Priority.
Use Ensure Print.
Increase the size of the print page buffer.
Add additional memory.
For information about print modes and print guarantees, refer to
the online help for the print driver.
For information about memory, refer to "Allocate Memory" in the
System Administration Guide.
Cause: Mail specifying a non-registered or invalid folder number
was received.
Remedy: Take one of the following actions:
Request the sender to register the folder with the specified number.
Request the sender to send to a valid folder.
m Cause: Documents stored in the folder have reached the hard disk
capacity limit.
Remedy: Remove unnecessary documents from the folder, and save
the document.
Refer to Delete Documents After Retrieval on page 5-1.
Cause: Secure print documents cannot be registered because of
hard disk malfunction.
Remedy: Contact the Customer Support Center.
Refer to Secure Print on page 9-5.
Cause: The maximum number of Secure Print users has been
exceeded and no space is available on the hard disk.
Remedy: Remove unnecessary documents stored on the printer,
and delete unnecessary Secure Print users.
For information about Secure Print, refer to Secure Print on page 9-
5.
For information about folders, refer to Delete Documents After
Retrieval on page 5-1.
Cause: Unable to sample print because the feature expansion kit is
not installed or has malfunctioned.
Remedy: A feature expansion kit is needed to use the Sample Print
feature. If the kit is malfunctioning, contact the Customer Support
Center.
Cause: Annotation is not possible due to insufficient hard disk
space.
Remedy: Remove unnecessary data from the hard disk to increase
free disk space.
Cause: An error occurred during PCL processing.
Remedy: Retry printing.
Cause: Delayed Print documents cannot be registered because of
hard disk malfunction.
Remedy: Contact the Customer Support Center.
Cause and Remedy