Xerox 4112 User Manual page 334

Problem Solving
Remedies are described in this section for situations in which the following messages are
displayed.
Category
Error Code
Message
C P S
A malfunction m m m
occurred.
Power-cycle
the machine.
(xxx-yyy)
Completed m m m
with an error.
(xxx-yyy)
A fault has m m m
occurred. The
machine has
rebooted.
Select Close.
When in
doubt, report
the
malfunction
to our Call
Center.
(xxx-yyy)
12-40
Xerox 4112/4127 Copier/Printer
User Guide
M O
m m Cause: An error occurred.
Remedy: Turn off the power, wait until the Control Panel display
goes dark and then turn on power again.
If the message persists, record the displayed contents for (xxx-
yyy). Switch off the machine immediately, wait for the Control
Panel display to go dark and contact the Customer Support
Center.
m m Cause: An error occurred and the job completed.
Remedy: Retry operation after waiting for a period.
m m Cause: An auto-recoverable internal error occurred and the
machine restarted automatically.
Remedy: Select the Close button. The machine is operating
normally now. If the error persists, call contact the Customer
Support Center.
Cause and Remedy