Xerox 4112 User Manual page 304

Problem Solving
Symptoms
Nothing is printed. Two or more sheets of paper
are being fed
simultaneously
(double-feed).
High-voltage power supply
malfunction.
White areas or Is the paper damp?
stripes appear.
The paper in use is
unsuitable.
The entire page is If the print was made using
printed faint. Tray 5 (Bypass), the size and
type of the loaded paper
differed from the setting on
the print driver.
Two or more sheets may be
feeding at once.
Paper becomes The paper in use is
wrinkled. unsuitable.
Text is blurred.
Paper is being added while it
is being fed.
Is the paper damp?
12-10
Xerox 4112/4127 Copier/Printer
User Guide
Check
Fan the paper and reset.
Refer to Loading Paper into Trays on page 8-1.
Contact the Customer Support Center.
Replace with paper from a new ream.
Refer to Loading Paper into Trays on page 8-1.
Load suitable paper.
Refer to Loading Paper into Trays on page 8-1.
Load paper of the correct size and type into Tray 5
(Bypass).
Fan the paper thoroughly before loading it.
Refer to Loading Paper into Tray 5 (Bypass) on
page 8-5.
Fan the paper thoroughly and reset.
Refer to Loading Paper into Trays on page 8-1.
Replace with paper from a new ream.
Refer to Loading Paper into Trays on page 8-1.
Remedy