Xerox 4112 User Manual page 299

Symptoms
Copies are not Is the document scanning
made at the glass or the document cover
desired size. dirty?
Is the document made of
highly transparent material
like a transparency?
Is the document at the correct
position?
Is the document loaded
correctly?
Are the document guides at
the correct position?
Is the document folded or
bent?
Is the document a
non-standard size?
Paper is often Is paper loaded properly in the
jammed or paper tray?
wrinkled.
Is the paper tray set properly?
Is the paper damp?
Is the paper curled?
Are the paper and paper tray
settings correct?
Are there any torn pieces of
paper still remaining inside the
machine or is there a foreign
object in the machine?
Is out-of-spec paper loaded in
the tray?
Is the paper tray loaded past
its maximum fill line?
Is the paper guide set
correctly?
Check
Clean the document feeder glass or the document
cover.
Refer to Cleaning the Document Cover and
Document Glass on page 11-14.
Place the document on the document glass, and
place a white sheet of paper on top of the
document before making a copy.
Load the document correctly.
Refer to Loading Documents on page 2-1.
Properly set the document guides.
Refer to Loading Documents on page 2-1.
Straighten and properly reset the document.
Refer to Loading Documents on page 2-1.
Enter the document size.
Refer to Original Size on page 2-25.
Load paper correctly.
Refer to Loading Paper into Trays on page 8-1.
To ensure tray closure, Firmly push it in as far as
possible.
Refer to Loading Paper into Trays on page 8-1.
Replace with paper from a new ream.
Refer to Loading Paper into Trays on page 8-1.
Either turn the paper so that the curl is facing down
in the paper tray, or replace with paper from a new
ream.
Refer to Loading Paper into Trays on page 8-1.
Refer to Curled Output Solutions on page 12-80
Make sure the paper and paper tray selected
match the paper size settings.
Refer to "Paper Tray Settings" in the System
Administration Guide.
Open the door of the machine or slide out the
paper tray to remove the torn paper or the foreign
object.
Refer to Paper Jams on page 12-41, Loading Paper
into Trays on page 8-1.
Replace with paper that meets machine
specifications.
Refer to Loading Paper into Trays on page 8-1.
Load paper in the paper tray so that it does not
exceed the maximum fill line.
Refer to Loading Paper into Trays on page 8-1.
Load the paper correctly, and apply the paper
guides lightly.
Refer to Loading Paper into Trays on page 8-1,
Change/Confirm the Tray Settings on page 8-14.
Problem Solving
Remedy
Xerox 4112/4127 Copier/Printer
User Guide
12-5