Change/Confirm The Tray Settings; Change/Confirm The Tray Settings From The All Services Screen - Xerox 4112 User Manual

Paper and other Media

Change/Confirm the Tray Settings

If you change paper types, the tray settings must be modified to reflect the paper type that is
loaded in the tray. The following describes how to change or confirm the attributes of the paper
loaded in the trays.

Change/confirm the tray settings from the All Services screen

Note
User Interface (UI) screens vary from system to system and from marketplace to marketplace.
As a result, the UI screens shown in this section may or may not reflect your system
configuration.
You can confirm and/or change the paper settings, such as weight, size, type, etc.
Tip
In order for the user to confirm or change paper settings, the System Administrator must enable
the Paper Tray Attributes feature. See your System Administrator, or refer to the System
Administration Guide, Chapter 8, "Setup Menu."
1. Press the Machine Status button on the Controller.
2. From the Machine Status menu, select the:
a. Tools tab
b. Paper Tray Attributes button
8-14
Xerox 4112/4127 Copier/Printer
User Guide