Xerox 4112 User Manual page 324

Problem Solving
Category
Error Code
C P S
016-729 m
016-730 m
016-731 m
016-732 m
016-733 m m
016-735 m
016-738 m
016-739 m
016-740 m
016-746 m
016-748 m m
016-749 m
016-755 m
016-756
016-757
12-30
Xerox 4112/4127 Copier/Printer
User Guide
O
M
Cause: Unable to print because the number of colors/resolution of
the TIFF file exceeds the allowed range.
Remedy: Change the number of colors/resolution for the TIFF file,
and specify the print data again.
Refer to Generic Scan Screen Features on page 3-2.
Cause: Detected a command not supported by ARTIV.
Remedy: Check the print data, remove the offending command,
and try to print again.
Cause: Unable to print TIFF data because it was interrupted.
Remedy: Retry printing.
Cause: Unable to use registered form specified by Emulation with
host.
Remedy: Resend the form data.
Cause: 1. Unable to retrieve IP address from text on the right side of
@ of an address during E-mail send.
2. Unable to resolve Internet address on the right side of @ by DNS.
Remedy: 1. Check the mail address.
2. Check the DNS address.
m Cause: Attempted to print Job Template List while updating the job
template.
Remedy: Retry printing after waiting for a period.
Cause: Booklet Creation is not applied to the specified paper.
Remedy: Specify the printable paper size for booklet creation.
Cause: The specified document and paper size are an unauthorized
combination.
Remedy: Specify the combination of the printable document and
paper size for booklet creation.
Cause: Booklet Creation is not applied to the specified paper tray.
Remedy: Specify the printable paper tray for booklet creation.
Cause: An unsupported feature is included in received PDF.
Remedy: Print using printer driver.
m Cause: Printing is not possible due to insufficient hard disk space.
Remedy: Reduce the number of pages of print data, for example, by
dividing up the print data or printing one copy at a time when
making multiple copies.
Cause: A PJL command syntax error occurred.
Remedy: Either confirm the print settings, or correct the PJL
command.
Cause: Attempted to process PDF file which was specified to
printing prohibited.
Remedy: Cancel the printing prohibited specification using Adobe
Reader and try to print again.
m Cause: No permissions to use the service.
Remedy: Check with your System Administrator.
m Cause: Password is incorrect.
Remedy: Enter the correct password.
Cause and Remedy