Paper Jams Inside Finisher Left Cover - Xerox 4112 User Manual

Problem Solving
7. Shift lever 3b on the right of the fuser unit as necessary and then remove the jammed
paper.
Tip
If the jammed paper remains inside and it is difficult to remove, pull out the duplex module
after returning the transfer module to the original position. Then try again.
8. Insert the transfer module completely and turn the green lever 2 to the left.
Note
If the lever cannot be turned, pull the transfer module to the middle and insert it again.
9. Close the front cover completely. The machine will not operate if the front cover is open
even slightly.

Paper Jams Inside Finisher Left Cover

Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
This section describes how to remedy paper jams that occur at the following locations:
• Paper jams at lever 1a and knob 1c
• Paper jams at lever 1d
• Paper jams at lever 1b
Note
Remedies differ according to the paper jam location. Follow the instructions displayed to
remove the jammed paper.
12-52
Xerox 4112/4127 Copier/Printer
User Guide