Accessing The Discs - Axis E100 User Manual

Accessing the Discs

Notes:
General Disc Settings
AXIS StorPoint CD E100 User's Manual
The StorPoint CD makes your networked CD/DVDs available to anyone who
has the appropriate privileges on the network. Users will access the StorPoint
CD just as any other workstation or file server.
You use your standard NetWare client to access the networked discs:
Network environments
Windows 95/98 and Windows NT 4 (NDS)
Windows 95/98 and Windows NT 4 (Bindery)
Windows for Workgroups 3.x (NDS)
Windows for Workgroups 3.x (Bindery)
Windows NT 3.51 (NDS)
Windows NT 3.51 (Bindery)
DOS
The examples will assume that you have not changed the default server


name. The default server name is AXIS<nnnnnn>_NW, where <nnnnnn>
are the six last digits of the StorPoint CD serial number. If you have
changed the server name, use the new name where the examples refer to the
default name.
Depending on the access rights set up by the Administrator, you might be


prompted to supply a password or receive a message similar to '
' when trying to access a shared resource on the StorPoint CD. The
denied
default Server password is
In the Windows 95/98 and Windows NT 4 environments, you can install


the AXIS StorPoint Disco utility, which is a powerful Windows application
for locating and using CD/DVDs located on AXIS storage servers, wherever
they are on your network. Refer to "AXIS StorPoint DISCO" on page 42.
To specify the general settings for an inserted disc, follow these steps:
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to .
pass
3. Click Discs & Drives.
4. Locate the desired disc in the file Volumes folder.
Section 4: NetWare (NCP)
See ...
page 62
page 64
page 66
page 68
page 70
page 70
page 72
.
pass
Access is
61