Axis E100 User Manual page 53

Notes:
Text Editor
Important!
AXIS StorPoint CD E100 User's Manual
3. Click admin. You will be prompted for the Server password. By default, this
is set to . To change the Server password, see "Server Password" on page
pass
24.
4. Click Network Settings.
5. Click Wizard . The Network Settings Wizard dialog appears.
6. Choose NetWare (NCP) to set up the StorPoint CD for your NetWare clients.
Click Start to proceed with the installation.
7. Follow the instructions on the screen. When finished, click Close.
8. Click Detailed View
9. Select the NetWare (NCP) tab and verify the settings.
10. Click OK.
Online help is available for all parameters.


The parameter list is described in detail in "Appendix A - Parameter List " .


If you do not have TCP/IP on your network, follow these steps to install the
StorPoint CD as an NDS server:
1. Login as Supervisor in bindery mode.
2. Verify that the NDS tree is synchronized. To do that, you load
on a NetWare server console in the NDS tree and select
.
repair
If the NDS tree is not synchronized, do not continue the installation until


you have solved the problem.
Section 4: NetWare (NCP)
. The Protocols dialog box appears.
DSREPAIR.NLM
Unattended full
53