Axis E100 User Manual page 66

Section 4: NetWare (NCP)
Windows for
Workgroups 3.x
(NDS Mode)
Note:
66
In Windows for Workgroups on a Novell NetWare client for NDS, follow these
steps:
1. Start the File Manager and select Network Connections from the Disk
menu. If you also have Microsoft Network installed, you may have to click
the NetWare... button.
2. Click the NetWare Connections button on the toolbar. A screen similar to this
is displayed:
3. Select the entry for your StorPoint CD. The default name is
AXIS<nnnnnn>_NW, where <nnnnnn> are the last six digits of the StorPoint
CD serial number.
4. Click the Login button.
5. Once you are logged in to the StorPoint CD, click the Drive Connections
button on the toolbar. This screen is displayed:
If the Show All Volumes parameter is set to yes, the individual discs are


shown at the same level as SYS. Some applications will not run properly
unless the data is stored at root level. To avoid such problems, assign a drive
letter to that particular disc.
AXIS StorPoint CD E100 User's Manual