Axis E100 User Manual page 33

Managing Shares
in Share-level
Access Control
Note:
AXIS StorPoint CD E100 User's Manual
By default, all new discs are shared automatically. If you want to change a share,
i.e. remove it or change the name, follow the procedure outlined below:
Macintosh HFS CD-ROM:s are not shared automatically. This can be


defined via the Web interface.
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to . To change the Server password, see "Server Password " on page
pass
24.
3. Click Disc & Drives.
4. Locate the resource you want to share or protect in the file tree, and click Access
Rights . The Access Rights dialog box appears.
5. Open the Windows Sharing page.
6. You can select whether you want to use the access rights of the disc or the drive
by checking the appropriate radio button. Note that this is a global setting for
all network protocols.
7. Select the Share as radio button, and enter a share name in the Share Name
field.
8. Specify the type of access you want the user to have:
• Read-Only to enable users to open and copy documents.
• Full to enable users to change, add and remove files.
• Depends on Password to allow different types of access. Note that you
must specify both password fields, otherwise the users will not be
prompted for any password.
9. Click OK.
Section 3: Microsoft & IBM Networks (SMB)
33