Configuring The Axis 7000; Accessing The Administration Tools - Axis 7000 User Manual

Configuring the AXIS 7000

14
Configuring the AXIS 7000
This section is targeted specifically to users responsible for the administration of the
AXIS 7000. Administrator(s) are granted with high-level privileges that are denied to
the ordinary user(s).
The following settings must be specified by the administrator before the AXIS 7000
can be used for distributing reproduced documents on your network:
• Network settings: define the parameters for TCP/IP and SMTP protocols.
• Destinations: specify the e-mail address, file server, or printer to which you
wish to send your document.
Note:
• If you have an active DHCP or BOOTP server on your network most network settings will be
set automatically. However, it is strongly recommended that you verify the settings from the
Web browser interface.
• When installing the AXIS 7000 for the first time, it is recommended that the Administrator
retains default system settings, profiles and paper sizes. The settings can be optionally custom-
ized at a later date once you are familiar with the unit operation and functionality.
• Refer to the User's Manual for information on the settings for profiles and paper sizes.
• It is possible to enable user authentication to restrict use of the AXIS 7000 to validated users
only. For more information, please refer to the AXIS 7000 User's Manual at the Axis Website
http://www.axis.com or on the AXIS Online CD.

Accessing the Administration Tools

The Web-based Administration tools provide a convenient method for managing
destinations, profiles, defining the network protocol settings, establishing user
privileges, authentication etc. The AXIS 7000 Administration pages are password
protected and available to the Administrator(s) only.
Follow the instructions below to access the Administration tools using a standard
Web browser, such as Netscape Navigator or Microsoft Internet Explorer.
1. Start your Web browser.
2. Enter the name or Internet address of your AXIS 7000 in the location/address
field.
Example:
http://172.16.253.80
The AXIS 7000 home page, Scan Document is displayed.
AXIS 7000 User's Guide