Axis E100 User Manual page 114

Appendix A: Parameter List
Parameter name
NDSAdminName
NDSAdminPassword
NDSInstall
NDSRightsStorage
NDSRightsFile
TimeSyncSources
[AFP]
AFPEnable
AppleTalk_Enable
AFPIP_Enable
ServerName
ZoneName
AuthenticationServer
AuthenticationEnable
[SMTP]
Primary Mail Server
Secondary Mail Server
Administrator Address
Mail Log Events
[HDCache]*
CacheMode*
ClearAllDisks*
EnableMaxAutoArchiveSize*
MaxAutoArchiveSize*
AutoEject*
EnableLowDiskWarning*
LowDiskTreshold*
FileCacheSize*
[END]
114
Value Description
Distinguished name of a user or administrator with Supervisor or
=
Create rights to the context where you want to install the
StorPoint CD, e.g. Admin.Acme.
Password for the administrator defined in NDSAdminName. Once
=
written into the configuration file, the password will not be shown
but replaced with *'s, representing each letter of the password.
= no Set to install when you are ready to install the StorPoint CD in
NDS, or forced to overwrite the NDS server object.
Set to NDS to store the access rights in the NDS tree. Set to File to
= NDS
store the access rights in a file on the Novell server. This is
necessary if you do not allow schema extensions in your NDS tree,
or if you do not have Supervisor access rights.
If you have set NDSRightsStorage to File, specify the whole path to
=
the file on the Novell file server using this syntax:
SERVER/VOLUME:DIR/.../FILE.DAT where SERVER is a NetWare
server name or IP address. The specified directory must exist and
the StorPoint CD must have Read, Write, Create, Erase, Modify
and File Scan rights. The StorPoint CD will create the file once you
start adding trustees.
For IPX, use SAP or specify a list of time server names to be
= SAP
contacted for time synchronization. For PureIP and NetWare/IP,
specify a list of server names or IP addresses. Default is SAP for the
network agreed time.
= yes Enables AFP.
= yes Enables AFP over AppleTalk.
Enables AFP over TCP/IP.
= yes
The server name in the AFP environment. Default is AXIS<nnnnnn>
=
where nnnnnn are the last six digits of the serial number.
The zone name to which the StorPoint CD server belongs.
=
Name of the server used for authenitcating clients.
=
Enables the authentication server. Default is no.
= no
= mail Name or IP address of the primary mail server.
= Name or IP address of the secondary mail server.
The administrator's e-mail address.
=
No means that no log events will be sent via e-mail to the
= no
administrator. Error means that only errors will be sent to the
administrator. Warning means that only warnings will be sent to the
administrator. All means that all logged events will be sent via e-mail
to the administrator
= mirror The default caching method to be used each time you insert a new
disc in one of the drives. None means no caching. Partial means that
the directory structure is cached to allow fast file browsing. Mirror
means complete caching. The hard disk will contain a complete
copy of the mirrored disc.
Set to yes to remove all information from the hard disk.
= no
Set to yes to enable the Max Auto Archive Size option.
= no
Specifies the maximum disc size to auto archive.
= 650
Set to yes to enable the Auto Eject function.
= no
Set to no to disable the Low Disk Warning option.
= yes
Specifies for which disc size a low disk warning shall be displayed.
= 650
= 0 Specifies how much of the disk space to use for caching. Default is
0 which disables the function.
AXIS StorPoint CD E100 User's Manual