Axis E100 User Manual page 20

Section 2: Installing the StorPoint CD
Text Editor in
Macintosh
20
To set the IP address for your StorPoint CD follow these steps:
1. Open the Chooser from the Apple menu.
2. Click the AppleShare icon.
3. From the Select a file server list, select AXIS<nnnnnn_AT> where <nnnnnn>
are the last six digits of the StorPoint CD serial number.
4. Select Registered User and click Connect. By default, the Name is set to
and the Password is set to
5. Select the System folder and click OK.
6. Open the System icon created on the desktop and select the Server Properties
folder.
7. Open the config.ini file.
8. In the text editor go to the [IP] section and change the Internet address to the
required IP address.
9. Go to the [Server] section and set Restart = yes to restart the server.
10. Select Save from the File menu.
.
pass
AXIS StorPoint CD E100 User's Manual
root