Table of Contents
Advertisement
Section 10: Hard Disk Caching
Verifying the Hard Disk
98
The caching facility requires at least one hard disk to be connected to the SCSI
bus or the IDE bus. The StorPoint CD will automatically format hard disks and
use them for hard disk caching. You can connect up to six or seven hard disks to
your
StorPoint CD depending on model.
Follow these steps to verify that a valid hard disk is connected to your StorPoint
CD:
1. Start your Web browser and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server username and password. By
default, this is set to
"Server Password " on page 24.
3. On the This StorPoint page, click the hard disk icon
StorPoint CD has detected a hard disk that can be used for hard disk caching.
4. Information about the hard disk will be displayed to the right.
If the hard disk has been used before and includes a partition table it needs
to be formatted before it can be used for hard disk caching. Click Format to
do that. The formatting will remove all the information currently cached on
the hard disk. This is not something you would normally want to do.
and
. To change the Server password, see
root
pass
AXIS StorPoint CD E100 User's Manual
to verify that the
Advertisement
Table of Contents
