Axis E100 User Manual page 25

Date & Time
AXIS StorPoint CD E100 User's Manual
1. On the This StorPoint page, click Settings to open the Server Settings
dialog box.
2. Open the Date & Time page.
3. Specify the time zone in which the StorPoint CD operates. Refer to
"Time Zone Parameter Values " on page 115.
4. To set the time using a time synchronization source, choose Automatically and
specify the time source:
Network
environment
NetWare IPX
NetWare PureIP
NetWare/IP
TCP/IP
Windows NT
domains
* Note: NTP is not natively supported by Windows NT servers. You will need third party software.
To set the time manually, choose Manually and specify the date in
format, and time in
yy-mm-dd
5. Click Close.
Section 2: Installing the StorPoint CD
Time Source: You must also specify the ...
Novell Directory Time Source parameter on the Network
Services (NDS) Settings | NetWare page:
- SAP or
- List of server names.
Novell Directory Time Source parameter on the Network
Services (NDS) Settings | NetWare page:
- List of server names or IP addresses.
Network Time NTP Server parameter on the Server
Protocol (NTP) * Settings | Date & Time page:
- Name or IP address of the time server.
Microsoft Windows
NT Network (SMB)
format using the 24 hour clock.
hh:mm:ss
25