Axis E100 User Manual page 24

Section 2: Installing the StorPoint CD
Via the config.ini File
Server Password
Note:
24
1. Locate the
config.ini
find it in the
Root/System/ServerProperties
2. Use your preferred text editor and change the
You will find the
Shut Down
3. Save the
config.ini
Your StorPoint CD will now shut down and you can then turn off the power.
To protect the system files, it is important that you set the Server password. The
Server password is used in basically all protocols, i.e. HTTP, NetWare (NCP),
Windows (SMB), Macintosh (AFP), SNMP and FTP. For example, a user will
be prompted for the Server password when trying to access the Administration
Web pages for the first time during a session.
By default, the Server password is set to
To set the Server password, follow these steps:
1. On the This StorPoint page, click Settings to open the Server Settings
dialog box.
2. Open the General page.
3. Specify and confirm the Server password.
4. Click Close.
If you lose the Server password, you must restore the factory default settings.


See "Restoring Factory Default Settings " on page 124.
file using your standard file manager tool. You will
Shut Down
parameter under the
file.
.
pass
AXIS StorPoint CD E100 User's Manual
folder.
parameter to
yes
section.
[Server]
.