Section 11 Monitoring The Storpoint Cd; Event Log - Axis E100 User Manual

Section 11 Monitoring the StorPoint CD

Event Log

Notes:
AXIS StorPoint CD E100 User's Manual
This section describes the following monitoring tools:
Tools
Event log
Statistics
E-mail
SNMP
AXIS ThinWizard - a tool for locating and managing
all the AXIS servers on your network
The event log is stored in the
System/ServerProperties
information such as:
Information, e.g. completed tasks
Warnings, e.g. hard disk full
Errors, e.g. installation failures
To display the event log, follow these steps:
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to . To change the password, see "Server Password" on page 24.
pass
3. Click Event Log.
All events are viewed in the same order as they entered the log.
If a synchronization source has been found or if the correct date and time


have been set manually, date information will appear in the log file.
When the server is restarted, a sub-set of critical events will remain in the


event log.
Click Clear Event Log, to clear the event log of events.


Section 11: Monitoring the StorPoint CD
See ...
page 105
page 106
page 107
page 107
page 109
file located in the
logfile.txt
folder. In the event log, the StorPoint CD writes
105