Connecting The Storpoint Cd To The Network - Axis E100 User Manual

Section 2: Installing the StorPoint CD

Connecting the StorPoint CD to the Network

Before You Begin
Procedure
12
Always consult the Network Administrator before making changes to the
network configuration.
To connect the StorPoint CD to your network, follow these steps:
1. Turn off the power.
2. Connect the network cable to the appropriate connector, i.e. RJ-45 for
100baseTX and 10baseT.
3. Switch on the tower.
The StorPoint CD front panel indicators will flash during power-on and self-
test. When the Status indicator stops flashing and turns solid green, the
StorPoint CD is ready for use.
Network cables
Network hub
StorPoint CD
installed in a
CD-ROM tower
AXIS StorPoint CD E100 User's Manual