Axis E100 User Manual page 118

Appendix A: Parameter List
FTP
Caution!
118
You can retrieve the configuration parameters of your StorPoint CD using the
File Transfer Protocol (FTP). FTP is supported by most operating
environments.
Follow these instructions:
1. Log in to the StorPoint CD with the command:
ftp <IP address>
where
<IP address>
2. You will be prompted for user id and password. Use the user id
has the default password
3. Windows 95 only: Change directory not to overwrite any of your system files.
See the caution note below.
4. To access the configuration file, type:
get config.ini
5. Edit the file using any text editor. In the Windows 95/98 and
config
Windows NT environments, you can for example use Notepad. Once the
editing is complete, save the file as
6. To upload the configuration file to the StorPoint CD, type
put config.ini
7. To exit FTP, type the command
Windows 95 has a directory called


files. It is therefore important to change to another directory using the
command before modifying your StorPoint CD configuration file from
within the Windows 95 environment. Failure to do this may result in some
of your system files to be overwritten.
is the name or IP address of your StorPoint CD.
pass.
.
config
, , or
quit bye
that contains important system
config
AXIS StorPoint CD E100 User's Manual
, which
root
.
exit
cd