Axis E100 User Manual page 108

Section 11: Monitoring the StorPoint CD
The AXIS MIB
SNMP Settings
108
The AXIS MIB includes a large number of objects that can be categorized as
follows:
• Menu objects - used for viewing and changing the StorPoint CD
configuration from the NMS program.
• Status and administration objects - used for monitoring the StorPoint CD
and storing parameter settings.
• Trap objects - used for alarm at various error conditions.
To add the AXIS MIB to your NMS software:
1. Get the MIB file from the following location:
ftp://ftp.axis.com/pub/axis/software/cd_srv/utility/mib/
2. Install the AXIS MIB according to instructions in your NMS software
documentation.
For technical details, view the MIB file
To configure your StorPoint CD for SNMP:
1. Start your Web browser and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to . To change the server password, see "Server Password" on page 24.
pass
3. Click Network Settings.
4. Click Detailed View
5. Select the SNMP tab.
6. Specify the settings, and click OK.
using a text editor.
axis_cd.mib
.
AXIS StorPoint CD E100 User's Manual