Axis E100 User Manual page 41

Alternative Method
DOS
AXIS StorPoint CD E100 User's Manual
If you do not have Peer for OS/2, you can map the StorPoint CD to a drive
letter using the
net use
1. Open an OS/2 window.
2. Use the command to mount the StorPoint CD. At the OS/2 prompt,
net use
type:
net use <drive letter>: \\AXIS<nnnnnn>\<folder>
where <nnnnnn> are the six last digits of your StorPoint CD serial number and
is any shared StorPoint CD folder.
<folder>
3. To make the connections permanent, create or edit your
include your
net use
Follow these steps:
1. At the DOS prompt, type:
net use <drive letter>: \\AXIS<nnnnnn>\<folder>
or:
net use <drive letter>: \\<IP address>\<folder>
where are the six last digits of your StorPoint CD serial number
<nnnnnn>
and is the StorPoint CD folder you want to map.
<folder>
2. To make the connections permanent, edit your
your commands.
net use
Example 1 (Root level access):
To access the root level of your StorPoint CD with serial number
00408C18025C under the drive letter E, type:
net use E: \\AXIS18025C\root
Example 2 (Volumes folder access):
If your StorPoint CD serial number is 00408C18025C, and you want to be
able to access all the discs under the drive letter F, type:
net use F: \\AXIS18025C\volumes
Example 3 (Disc access):
If your StorPoint CD serial number is 00408C18025C, and you want to
map a disc named 44018881 to drive G, type:
net use G: \\AXIS18025C\44018881
Section 3: Microsoft & IBM Networks (SMB)
command. Follow these steps:
commands.
file to
startup.cmd
file to include
autoexec.bat
41