Axis E100 User Manual page 125

Config.ini
Push Button
AXIS StorPoint CD E100 User's Manual
To restore the defaults settings using the
1. Locate the
config.ini
find it in the
Root/System/ServerProperties
2. Use your preferred text editor and change the
to
configuration, volumeProperties
parameter under the
Defaults
3. Change the
Restart
under the
[Server]
4. Save the
config.ini
The factory default setting will now be restored and the StorPoint CD will
automatically restart.
To restore the default settings using the Push button:
1. Shut down the StorPoint CD.
2. Use a thin object, e.g. a pen to press and hold the Push button.
3. Switch on the StorPoint CD.
4. Wait until the Status indicator flashes yellow (one flash/second).
5. Let go of the button at least two seconds.
6. Press and hold the Push button again until the Status indicator shows a steady
yellow light. This may take 5-6 seconds.
7. Restart the StorPoint CD by switching the server off and on. The StorPoint
CD is now reset to factory default settings.
config.ini
file using your standard file manager tool. You will
Factory Defaults
or
all
section.
[Server]
parameter to . You will find the
yes
section.
file.
Push button
Appendix B: Troubleshooting
file:
folder.
parameter
. You will find the
Factory
parameter
Restart
125