Axis E100 User Manual page 112

Appendix A: Parameter List
Parameter name
InternetAddress
DefaultRouter
NetMask
BOOTPEnable
DHCPEnable
RARPEnable
DomainName
PrimaryDNS
SecondaryDNS
NTPServer
EnableWINS
PrimaryWINSserver
SecondaryWINSserver
ProtectIP
SLPDirectoryAgent1
SLPDirectoryAgent2
SLPScopeList
[HTTP]
HTTPEnable
EnableMediaAccess
ExternalLink
ExternalImage
[FTP]
FTP User name
FTP User password
Timeout in seconds
FTP Max Users
[SMB]
SMBEnable
ServerName
ServerPassword
Domain/GroupName
SecurityMode
112
Value Description
The StorPoint CD IP address.
= 192.36.253.80
The IP address for the default router. All traffic directed outside
= 0.0.0.0
the local network (according to the NetMask) is sent to the default
router. Any re-routing via other routers is done automatically. The
default 0.0.0.0 indicates that no default router is set.
Used to determine when the traffic should be sent via a router. For
= 0.0.0.0
example, the normal class C mask is 255.255.255.0. The default
0.0.0.0 indicates that automatic router sensing is used.
Enables BOOTP IP address setup.
= yes
Enables DHCP IP address setup.
= yes
Enables RARP IP address setup.
= yes
Name of the domain to which the StorPoint CD belongs.
=
The IP address of the primary DNS server. Used for identifying
= 0.0.0.0
computers with names instead of IP addresses.
The IP address of the secondary DNS server, should the primary
= 0.0.0.0
DNS server be unavailable or disconnected.
Name or IP address for the NTP server.
=
Enables WINS over NetBIOS/TCP/IP.
= no
The IP address of the primary WINS server.
= 0.0.0.0
= 0.0.0.0 The IP address of the secondary WINS server, if required.
= no Protects the StorPoint CD from changing the IP address using the
ARP or Web browser method. Default is no, which allows the IP
address to be set within 30 minutes from restart.
The IP address or DNS name of an SLP directory agent.
= auto
The IP address or DNS name of an SLP directory agent.
= auto
= DEFAULT The SLP scope to which the StorPoint CD belongs. SLP scopes are
used for collecting services into logical or administrative groups.
Specify the scope names in a list separated by commas, i.e.
scope1,scoper2,scope3... The default value DEFAULT means that no
specific scope will be configured.
Enables HTTP. Set to no to restrict users from accessing the
= yes
CD-ROMs from a Web browser.
= yes Enables access to the inserted discs. When set to no, only
administration is available from HTTP.
Specifies the URL to a customized link, e.g. to your company's Web
=
site. The link will be available from the StorPoint CD Web
interface.
Specifies the URL to the image that will indicate the customized
=
external link.
Alternative user name for accessing the StorPoint CD Volumes
=
folder via FTP.
Once written into the configuration file, the password will not be
=
shown but replaced with *'s, representing each letter of the
password.
= 0 The time of inactivity in seconds after which an FTP is closed down.
The maximum number of simultaneous FTP sessions.
= 10
Enables SMB.
= yes
The server name in the SMB environment. Default is AXIS<nnnnnn>
=
where nnnnnn are the last six digits of the serial number.
= pass The Supervisor, Administrator or Root user password used for
basically all protocols; i.e. HTTP, NetWare bindery, SMB user-level,
SNMP and FTP. Once written into the configuration file, the
password will not be shown but replaced with eight *'s,
representing the password.
Name of theStorPoint CD workgroup in SMB. If not specified, the
=
StorPoint CD will appear in the workgroup that comes first in
alphabetical order.
= shareLevel Specifies the security mode used in SMB: userLevel or shareLevel.
AXIS StorPoint CD E100 User's Manual