Axis E100 User Manual page 45

AXIS StorPoint
DISCO Settings
Note:
Automatic Searches
Note:
Manual Searches
Notes:
AXIS StorPoint CD E100 User's Manual
To specify the program settings, click File | AXIS StorPoint DISCO Settings.
The dialog contents depends on which version of the AXIS StorPoint


DISCO you are running. The example above shows the server version.
AXIS StorPoint DISCO can automatically scan the network in order to detect
the most recently attached storage servers and inserted discs.
To specify how often you want AXIS StorPoint DISCO to perform automatic
searches:
1. Click File | AXIS StorPoint DISCO Settings.
2. Open the Disc Search page, and fill in the desired values for automatic
searches.
3. Click OK.
This function is not available in the client version.


AXIS StorPoint DISCO provides two methods to manually initiate searches on
the network:
• Quick search – Searches the most recently inserted discs on the previously
detected storage servers. Select Quick Search from the View menu.
• Full search - Searches the entire network for the most recently attached
storage servers and inserted discs. Select Full Search from the View menu.
Network searches are performed in the background without decreasing


performance. However, it may take several minutes to complete a search on
a large network. A full search takes more time to complete than a quick
search.
During the search, the AXIS StorPoint DISCO icon on the


taskbar will change its appearance to indicate that a search is
being performed.
Section 3: Microsoft & IBM Networks (SMB)
45