Axis E100 User Manual page 142

Appendix D: Tower and Drive Installation
LED Indicators
Serial Number
IDE Server
Network Connector
Note:
142
The StorPoint CD front panel indicators show the status of the unit. The
indicators have the following functions:
• Status - Flashes during startup. The light turns solid green when the
StorPoint CD is ready for use.
• SCSI - Flashes to indicate disc access.
• Network - Flashes to indicate the presence of network traffic.
• Power - Remains on to indicate that power is present in the unit.
Refer to "The Front Panel Indicators" on page 122 for a list of error conditions.
The StorPoint CD serial number is found on the labels at the underside of the
server unit and at the back of the tower.
Front panel indicators
IDE connector(s)
Cat 5 cable
The StorPoint CD is equipped with a 100baseTX connector. The internal
network connector will automatically adjust to 10baseT or 100baseTX, full or
half duplex mode. Use a Category 5 UTP cable for the 100baseTX operation.
When the StorPoint CD has been installed in a tower, the network


connector is found on the network connection board that appears at the
back of the tower. Note that the network cable cannot be connected directly
to the server unit.
Connection board
Power supply
connector
Network connection
Push button
Network
connector
AXIS StorPoint CD E100 User's Manual
board