Axis Thinwizard - Axis E100 User Manual

AXIS ThinWizard

Note:
Installing AXIS
ThinWizard
Accessing AXIS
ThinWizard
AXIS StorPoint CD E100 User's Manual
AXIS ThinWizard provides a convenient interface for locating and managing all
the AXIS servers on your network. AXIS ThinWizard runs on Windows NT,
Windows 95/98 and UNIX.
AXIS ThinWizard requires the IP address of your StorPoint CD to be set.


Refer to "Assigning an IP Address" on page 13.
The AXIS ThinWizard is included on the AXIS Online CD. The required
software can also be downloaded from the Axis Web Site free of charge. An
installation wizard will guide you through the installation procedures.
Follow these steps to access the AXIS ThinWizard:
1. Make sure an AXIS ThinWizard server is running on your network.
2. Start the Web browser and enter the name or IP address of the AXIS
ThinWizard server in the location/address field. If the AXIS ThinWizard
server is installed on a port other than port number 80, you must add the port
number to the URL:
http://<IP address>:<port number>/
Example:
http://192.16.253.80:8011/
3. The AXIS ThinWizard start page appears.
4. Enter your user ID and password and click Log in.
Section 11: Monitoring the StorPoint CD
109