Axis E100 User Manual page 119

Text Editor
Important!
Configuration Settings
Access Control
Parameters
Notes:
AXIS StorPoint CD E100 User's Manual
If you do not have TCP/IP on your network, you can edit the StorPoint CD
parameter list and access control parameters via the text files. Use your preferred
text editor to make updates to the files.
You submit the new settings to the StorPoint CD by simply saving the files. To
activate the new settings it is necessary to restart the StorPoint CD. You can do
this by setting the Restart parameter to
Do not restart the StorPoint CD in the middle of the NDS installation.


The StorPoint CD configuration settings are stored in the
located in the
System/ServerProperties
Example:
; AXIS StorPoint CD Parameter List, V5.31
[Server]
HardwareAddress
Date
Time
FactoryDefaults
Restart
TimeZone
TimeSyncSource
ServerPassword
Shut Down
NetworkSpeed
CDWritePassword
[SCSI]
SCSITermination
JukeBoxLockTime
Disconnect_Reselect
BusMode
[IP]
InternetAddress
DefaultRouter
NetMask
BOOTPEnable
DHCPEnable
RARPEnable
...
The StorPoint CD access control parameters are stored in separate text files for
each shared resource. These text files are located in the
System/VolumeProperties
The text files cannot be used for setting up access rights for NetWare.


Instead, you can use standard NetWare tools such as NWAdmin or Filer.
The text files cannot be used for setting up NT user-level rights for SMB.


Instead, you can use the Windows NT Explorer.
.
yes
folder.
= 00:40:cc:24:c3:0c
= 99-11-01
= 08:54:37
= no
= no
= UTC
= None
= ********
= no
= auto
= ********
= on
= 0
= on
= Asynchronous
= 192.16.253.80
= 192.16.1.1
= 255.255.0.0
= yes
= yes
= yes
folder.
Appendix A: Parameter List
file
config.ini
119